Table of Contents
Advertisement
Cleaning the metal mesh grease filters
:
Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without the grease filter.
Notes
Do not use any aggressive, acidic or alkaline cleaning
■
agents.
When cleaning the metal mesh grease filters, also clean the
■
holder for the metal mesh grease filters in the appliance
using a damp cloth.
The metal mesh grease filters can be cleaned in the
■
dishwasher or by hand.
In the dishwasher:
Note: If the metal grease filters are cleaned in the dishwasher,
slight discolouration may occur. This has no effect on the
function of the metal grease filters.
Do not clean heavily soiled metal grease filters together with
■
utensils.
Place the metal grease filters loosely in the dishwasher. The
■
metal grease filter must not be wedged in.
By hand:
Note: You can use a special grease solvent for stubborn dirt. It
can be ordered via the Online Shop.
Soak the metal mesh grease filters in a hot soapy solution.
■
Clean the filters with a brush and then rinse them thoroughly.
■
Leave the metal mesh grease filters to drain.
■
6
Removing metal grease filter
Open the lock and fold down the metal grease filter.
1.
While doing this, place the other hand under the metal
grease filter.
Take the metal grease filter out of the holder.
2.
Undo the threaded pin and separate the two parts of the
3.
metal grease filter.
Notes
Grease can accumulate in the bottom of the metal grease
■
filter.
Hold the metal grease filter level, otherwise grease will drip
■
out.
Clean the metal grease filter.
4.
Installing the metal mesh grease filter
Connect the two parts of the metal grease filter and screw
1.
together using the threaded pin.
Fit the metal grease filter.
2.
While doing this, place the other hand under the metal
grease filter.
Fold the metal grease filter upwards, locking it in place.
3.
Advertisement
Table of Contents
