Download Print this page

HAMPTON BAY NXT-LV-PW06 Use And Care Manual page 2

Led path light

Advertisement

Care & Cleaning
Before attempting to clean the xture, disconnect the power to the xture by turning the breaker off or removing
the fuse from the fuse box.
To clean the xture, use a dry or slightly dampened clean cloth.
Do not use chemicals, solvents, or harsh abrasives, as damage to the xture may occur.
Troubleshooting
Problem
The light do not turn on.
A light ickers.
The lights on all xtures
icker.
Warranty
The manufacturer warrants this product to be free for one (1) year against any defects that are due to faulty materials
or workmanship. This warranty applies only to the original consumer purchaser and only to products used in normal
use and service. If this product is found to be defective, the manufacturer's only obligation, and your exclusive
remedy, is the repair or replacement of the product at the manufacturer's discretion, provided that the product has
not been damaged through misuse, abuse, accident, modi cations, alterations, neglect, or mishandling. This
warranty shall not apply to any product that is found to have been improperly installed, set up, or used in any way not
in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product
as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation or any other failure not relating
to faulty workmanship. This warranty shall not apply to the nish on any portion of the product, such as surface
and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and speci cally
disclaims any warranty, whether expressed or implied, or tness for a particular purpose, other than the warranty
contained herein. The manufacturer speci cally disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.Hamptonbay.com.
Cable Selection
12 VOLT TAP
Total Fixture Wattage
0-60 Watts
61-120 Watts
121-180 Watts
181-240 Watts
241-300 Watts
Watts
Watts
15 VOLT TAP
Total Fixture Wattage
0-60 Watts
61-120 Watts
121-180 Watts
181-240 Watts
241-300 Watts
600W Transformer = (2x300) Watts
900W Transformer = (3x300) Watts
* NOT RECOMMENDED FOR HALOGEN LANDSCAPE LIGHTS
This data is provided as a general guideline. Actual performance will depend on the installation layout, the xtures,
and the condition of the cable.
Possible Cause
There is no power.
There is a disconnection or
break in the wire.
The transfomer setting is
incorrect.
There is a loose wire
connector to the xture.
There is a loose connection
at the transformer.
0-50 feet
16 AWG
16 AWG
14 AWG
14 AWG
12 AWG
12 AWG
12 AWG
0-50 feet
16 AWG*
16 AWG*
14 AWG*
14 AWG*
12 AWG*
12 AWG*
12 AWG*
Solution
Check the outlet and ensure that a breaker or GFCI circult
has not been tripped.
Follow the wires from the xture and ensure a continuous
connected path back to the transformer.
Check the setting on the transformer.
Tighten the wire connector and ensure the metal contacts
pierce the insulation on the low voltage cable from the
transformer.
Unplug the transformer from the outlet and visually inspect
the positive and negative connecting posts. Each wire should
be securely screwed in and not in contact with another.
Cable Length
51-100 feet
16 AWG
14 AWG
12 AWG
12 AWG
Not recommended
Not recommended
Not recommended
Cable Length
51-100 feet
16 AWG
16 AWG
14 AWG
14 AWG
12 AWG
12 AWG
12 AWG
2
101 -150 feet
14 AWG
12 AWG
Not recommended
Not recommended
Not recommended
Not recommended
Not recommended
101 -150 feet
16 AWG
12 AWG
12 AWG
12 AWG
Not recommended
Not recommended
Not recommended

Advertisement

loading

This manual is also suitable for:

1001486801