Table of Contents
Advertisement
2.6.5
External USB2.0 Port Installation
Step 1: Remove the USB2.0 Port punchouts by hand or with a tool.
Step 2: Attach the USB2.0 Port connectors to the front panel with four screws. Note the
orientation of the tab. (While the orientation is not as important, AAEON suggests
using this direction).
Step 3: Connect the USB2.0 cables to the USB2.0 headers on the board. Each header is
a dual USB port and correlates to one set of dual USB ports.
Note: The orientation/assignment of each header to USB port is not vital for correct
installation. However, if port assignment is important for your application, be sure to
take note which ports are connected to which header.
Chapter 2 – Hardware Information
42
Advertisement
Table of Contents
