Contents 1. Safety information........................2 2. Technical information......................7 3. Attachment and body size.......................8 4. Installation and connecting.....................9 5. Control panel.........................12 6. Menu setting..........................13 7. Channel function........................15 8. Circuit connecting diagram....................25 9. Cleaning and maintenances....................26 10. Troubeshooting........................27 11. Duty exonerative and copyright protection..............28 Congratulations on choosing our company product! We thank you for your custom.
SAFETY INFORMATION ■This lighting fixture is for professional use only - it is not for household use. Make sure all parts for fixing the projector are in a good state of repair. Make sure the point of anchorage is stable before positioning the projector. The safety chain must be prgperly hooked onto the fitting and secured to the framework.
Page 4
60℃ The maximun temperature that can be reached on the external surface of the fitting, in a thermally steady state,is 60℃。 Avoid contact bypersons and materials. Allow the fixture to cool for at least 5 minutes before handling. ■The light source The light source in this xture shall be replaced by the manufacturer or its service agent or similar qualication.
TECHNICAL INFORMATION ● Power supplies available AC100-240V∽,50/60Hz ● Power 100W,PF 0.988 ● LED chip: Tian xin 15W,RGBW 4 in 1 LED chip ● :10PCS. LED QTY ● : 50000h Average life ● : Color RGBW macro color system.LED can be controlled pixel by pixel, delivering versatile effects。...
INSTALLATION AND CONNECTING Installing the projector- Fig. 3 The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall. WARNING:with the exception of when the projector is positioned on the floor, the safety rope must be fitted. This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base.
Page 11
POWER END POWER IN Wire Color Wire Color Conductor Symbol (EU models) (US models) black live brown neutral blue white green ground(earth) yellow-green The stage lighting power supply can not be more than 10pcs pre line ● connection to the eiectricty mains must be carried out by a qualified electrical ●...
Page 12
OUT IN DMX IN DMX - output DMX-input 1 - Shield - Shield 2 - Signal (-) - Signal (-) - Signal (+) - Signal (+) - Not connected - Not connected - Not connected - Not connected all the projectors are together The projector dn’t touch each other or plinth).
CONTROL PANEL ENTER Up arrowhead : page up Down arrowhead : page down RIGHT LEFT Left arrowhead : reduce Right arrowhead : increase Enter : OK function Exit : in the choice screen DOWN...
MENU SETTING note Ⅰ menu Ⅱ menu Main menu Address ADD:000- Channel 45CH 25CH 18CH 40CH Hold Black Green Blue White R&G R&B DMX.Fuc R&W When the signal is disconnected, the lamp remains in its final state G&B G&W Setting B&W Pro1 Pro2...
Page 15
note Ⅰ menu Ⅱ menu Main menu W000-255 M000-255 FSCE Z000-255 Setting Return Dim 000- 255 Shu 000- 255 Red 000 - 255 Gree 000- 255 List Information Blue 000 - 255 Whit 000- 255 Macr 000- 255 Eff 000- 255 EF - S 000- 255 V1.00 Vers...
Page 18
channel(Extended 45CH) Channel Function Percentage Dimmer 0-255 0-100 Shutter 0-255 0-100 0-255 Red 1 0-100 0-100 0-255 Green 1 0-100 0-255 Blue 1 0-100 0-255 White 1 0-255 0-100 Red 2 0-255 0-100 Green 2 0-255 0-100 Blue 2 0-255 0-100 White 2 0-255...
Page 19
Channel Function Percentage Blue 8 0-255 0-100 White 8 0-255 0-100 0-255 Red 9 0-100 0-100 0-255 Green 9 0-100 0-255 Blue 9 0-100 0-255 White 9 0-100 0-255 Red 10 0-255 0-100 Green 10 0-255 0-100 Blue 10 0-255 0-100 White 10 Macro...
Page 25
CHANNEL(40CH) Channel Percentage function note 0-255 0-255 Green 0-255 Blue 0-255 White 0-255 0-255 Green 0-255 Blue 0-255 White 0-255 0-255 Green 0-255 Blue 0-255 White 0-255 0-255 Green 0-255 Blue 0-255 White 0-255 0-255 Green 0-255 Blue 0-255 White 0-255 0-255 Green...
CLEANING AND MAINTENANCES ■1.In order to ensure the projector could work normally. It should be kept clean always . The lens should also be regularly cleaned to maintain an optimum light output. Do not use any type of solvent on lens. It will damage the projector. ■2.Suggestion: The continue usage of the light don't exceed 4 hours.
TROUBESHOOTING It is recommended some solution for some normal trouble shooting. Any inextricability problems should always be handling by the professional person. Disconnect the power supply before maintenance the light. ■ LED off 1.Please check if install the suitable voltage 2.Please check whether the led will reach the end of their life can explode;...
DUTY EXONERATIVE AND COPYRIGHT PROTECTION ◇The lamp belongs to consumption products that is not guarantee to keep it in good repair. ◇Any products broken that didn't according to the instruction is not guarantee to keep it in good repair. ◇The commentary for all the instruction belongs to the supplier in final. ◇No authorize can't copy.