Summary of Contents for Fly Dragon LIGHT SKY F1700WB
Page 1
E-mail: F1700W B Address: No. 43, Yunfeng Road, Xiuquan Street, Huadu District, Guangzhou, China Please read these user manual carefully before use!
Contents 1. Safety information......................2 2. Technical information....................4 Attachment and body size..................7 4. Installation and connecting..................8 5. Control panel......................11 6. Menu setting.......................12 7. Channel function......................17 8. Circuit connecting diagram..................19 9. Cleaning and maintenances..................20 10.Troubeshooting......................20 11.Duty exonerative and copyright protection............23 Congratulations on choosing our company product! We thank you for your custom. ◆Please note that this product, as all the others in the rich my company range, has been designed and made with total quality to ensure excellent performance and best meet your expectations and requirements.
SAFETY INFORMATION ■This lighting fixture is for professional use only - it is not for household use. Make sure all parts for fixing the projector are in a good state of repair. Make sure the point of anchorage is stable before positioning the projector. The safety chain must be prgperly hooked onto the fitting and secured to the framework.
Page 4
120℃ The maximun temperature that can be reached on the external surface of the fitting, in a thermally steady state,is 120℃。 Before starting any maintenance work or cleaning the projector, cut off power from the mains supply. After switching off, do not remove any parts of the fitting, to avoid getting burnt for at least 30 minutes. After this time the likelihood of the lamp exploding is virtually nill.
TECHNICAL INFORMATION Power supplies available : IP set ● : ● 198 264 V~ 50/60Hz 11A built-in long-life battery, can set address without Power : ● power connection - 2000W PF≥0.98 Software upgrade : ● L amp : Upgrade via USB interface ●...
Page 6
Color wheel 颜色盘 7-Congo 6-CTB 8-Red 深蓝A06 DL058 红色A05 5-Magenta 品红色A11 白光孔 White 橙色A36 蓝色A08 4-Orange 减绿色 1-Blue SPF044 绿色A23 3-1/2minus green 2-Green...
INSTALLATION AND CONNECTING Safety rope Installing the projector- Fig. 3 The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall. WARNING:with the exception of when the projector is positioned on the floor, the safety rope must be fitted. This must be securely fixed to the support structure of the projector and then connected to the base handle.
Page 10
N(White/Blue) L(Black/Brown) (Green/Yellow Green) POWER IN Wire color-coding and power connections : Wire Color Wire Color Conductor Symbol (EU models) (US models) black brown live neutral blue white ground(earth) green yellow-green connection to the eiectricty mains must be carried out by a qualified electrical ●...
Page 11
DMX512 in out signal end DMX - output DMX-input 1 - Shield - Shield 2 - Signal (-) - Signal (-) - Signal (+) - Signal (+) - Not connected - Not connected - Not connected - Not connected ● Please use the round 3 or 5-pin XLR plugs &sockets offered by menu facture to connect the first projector's output to the second projector' input and connect the second projector's output to the third projector's input.
CONTROL PANEL D ispl ay ENTER Up arrowhead : page up Down arrowhead : page down RIGHT LEFT Left arrowhead : reduce Right arrowhead : increase Enter : OK function Exit : in the choice screen DOWN ● Press the switch.The projector starts resetting the effects. At the same time,the following information scrolls on the display (please refer to the actual material) DMX:...
Ⅰ menu Ⅱ menu Ⅲ menu ⅠV menu Main menu Address → 1-512 Channel mode → Standard(25) Input mode SETTING → → DMX Blackout DMX State → Hold Power on time 0 - 99999H Fixture times → Lamp on time 0 - 99999H All time 0 - 99999H...
Page 14
Ⅰ menu Ⅱ menu Ⅲ menu ⅠV menu Main menu 15.Blade RF 0 - 255 16.Framing Rot. 0 - 255 17.Framing Mac. 0 - 255 18.Framing Mac.Z. 0 - 255 DMX live 19.Zoom 0 - 255 → 20.Focus 0 - 255 21.Focus fine 0 - 255 22.Auto Fin.
Page 15
Ⅰ menu Ⅱ menu Ⅲ menu ⅠV menu Main menu 1.Pan 0 - 255 2.Pan fine 0 - 255 3.Tilt 0 - 255 4.Tilt 0 - 255 5.P/T speed 0 - 255 6.Functions 0 - 255 7.Strobe 0 - 255 8.Dimmer 0 - 255 9.Dimmer fine...
Page 16
Ⅰ menu Ⅱ menu Ⅲ menu ⅠV menu Main menu Pan Drive IC OK/ Reset/ Error Tilt Encoder OK/ Reset/ Error Tilt Drive IC OK/ Reset/ Error Fixture state → → OK/ Reset/ Error Tilt OK/ Reset/ Error OK/ Reset/ Error OK/ Reset/ Error Colour wheel Zoom...
Page 17
Ⅰ menu Ⅱ menu Ⅲ menu ⅠV menu Main menu Color module Framing module Simple update → Zoom module FANDRV Pass Service → Factory → Update word Display → Pan/Tilt Color module Framing module Whole update → Zoom module FANDRV...
J10 J11 Top Level Profile driver board Focus fan board Focus M otor Zoom Motor Te mp e rature se n sor CMY D rive b o a r d Standard Profile driver board R1 472 R1 472 R2 472 R2 472 D i s p lay b o a r d Pan/Tilt B oard...
Page 22
◎ Please check whether the DMX512 controller pass the “turn on”oder. ◎ Please check the connection of the trigger circuit is loose contact. ◎ Please check whether the connected point of he trigger point is loose contact, faster the connect cable. ◎...