Table of Contents
Advertisement
10. Attach the Crossbar (107) to the Handrails (82,
83) with four #10 x 3/4" Screws (2) and four #10
Star Washers (12). Do not tighten the Screws
yet.
Insert the Console Frame (102) into the
Handrails (82, 83). Attach the Console Frame
with four 1/4" x 1" Patch Bolts (9). Do not
tighten the Patch Bolts yet. Be careful not to
pinch the Upright Wire (87).
First, firmly tighten the two indicated #10 x
3/4" Screws (2). Do not overtighten the
Screws or use a power tool. Next, tighten the
other two #10 x 3/4" Screws and then tighten
the four 1/4" x 1" Patch Bolts (9).
11. Firmly tighten the four 5/16" x 1" Flat Head
Patch Bolts (3) and the two 5/16" x 1" Patch
Bolts (4) (only one side is shown).
With the help of a second person, hold the con-
sole assembly near the Right Handrail (83) and
the Left Handrail (not shown).
Connect the Upright Wire (87) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN YOU TURN ON THE
POWER. Remove the wire tie from the Upright
Wire.
Connect the ground wire from the console as-
sembly to the Console Ground Wire (109).
All manuals and user guides at all-guides.com
11
10
First
9
2
12
107
82
11
Console
Assembly
Console
Wire
87
Wire
Tie
4
3
102
First
9
2
12
87
83
Console
Wire
87
Ground Wire
109
83
Advertisement
Table of Contents
