Fig. 53: Installing Turbine Diffuser 1 - ABB HT604643 Operation Manual

Operation Manual / A170-M.. - A175-M..
9 Disassembly and assembly / 9.8 Installing the nozzle ring
Installing turbine diffuser
Fig. 53: Installing turbine diffuser 1
1. Using lifting gear, move turbine diffuser (63000) in over guide studs (90802) until the
lifting gear is on the gas outlet casing.
2. Fit guide plates (90328) with nuts (61037).
3. Remove the lifting gear.
4. Slide in turbine diffuser as far as it will go.
5. Remove nuts (61037), guide plates (90328) and guide studs (90802).
© Copyright 2020 ABB. All rights reserved. HZTL4033_EN Rev.G December 2020