Fig. 51: Installing Nozzle Ring 2; Table 37: Tightening Torque (56014) - ABB HT604643 Operation Manual

Operation Manual / A170-M.. - A175-M..
9 Disassembly and assembly / 9.8 Installing the nozzle ring
Fig. 51: Installing nozzle ring 2
Product
A170-M
A175-M
Table 37: Tightening torque (56014)
6. Loosen nuts (61037) and remove guide plate (90328).
7. Loosen screws (90339) and remove retaining plate (90338) with guide rod (90336).
8. Coat the threads of screws (56014) and the contact surface between screw and locking
washer with high-temperature grease.
9. Fit the nozzle ring (56001) on the gas inlet casing (51001) using the screws (56014) and
locking washers (56015).
10. Bend over locking washers (56015).
© Copyright 2020 ABB. All rights reserved.
Size
M10
M10
HZTL4033_EN
Tightening torque [Nm]
50
50
Rev.G December 2020