Thank you for buying the B20L professional steam station, the new professional steam- ironing system from Bosch. These instructions contain valuable information about the unique features of this iron and some hints to make ironing easier for you. Please visit www.bosch-home.co.uk for...
need, e.g. replacing a faulty mains cable, must only be carried out by qualified personnel from an Authorised Technical Service Centre. Important : • This appliance reaches high temperatures and produces steam during use, this could cause scalds or burns in case of improper use. •...
Setting the temperature 1. Check the ironing instruction label on the garment to determine the correct ironing temperature. 2. Turn the temperature selector (14) to the required setting: • Synthetics •• Silk – Wool ••• Cotton – Linen 3. The indicator lamp (17) will remain lit while the iron is heating and go out as soon as the iron has reached the selected temperature.
“Pulse steam” function This appliance has a special function for tackling difficult creases. When the steam release button is activated, the steam generator will give three powerful shots of steam so that the steam reaches even deeper into the fabrics. 1.
Use the normal energy setting for thick and highly wrinkled fabrics. Note: If you work with the “Energy saving” function, the variable steam regulation and temperature regulation can still be used as recommended. Cleaning & Maintenance Always unplug the appliance from the mains supply before carrying out any cleaning or maintenance operation on it.
“Calc‘n clean” Cleaning the Boiler To extend the life of your steam generator and to avoid any build up of scale, it is essential that you rinse out the boiler after several hours of use (approximately after 50 hours). If the water is hard, increase the frequency.
Rinsing the iron steam chamber Caution! Risk of burns! This procedure helps to remove scale particles out of the steam chamber. Carry it out approximately every 2 weeks, if the water in your area is very hard. a) Ensure that the iron is cooled down. b) Set the temperature selector (14) of the iron to the “min”...
Trouble shooting Problem Possible causes The steam generator • There is a connection problem. does not come on. • The main power button is not switched on. The iron does not • The main power button is not heat up. switched on.
Problem Possible causes Loss of pressure Steam release button activated for during ironing. a long period of time. Waterspots appear May be caused by steam on the garment during condensed on the ironing board. ironing. Water spots appear Water spots are caused by steam on the garment during condensation in the hose when use of the “Ultimate...
Page 12
Great Britain Bosch Customer Service Grand Union House Old Wolverton Road Milton Keynes MK12 5PT 001 TDS20..GB/04/11...