Table of Contents
Advertisement
en Installation and connection
4
Installation and connection
4.1 Safety clearances
Comply with the safety clearances for the appliance.
4.2 Installing and connecting the appliance
WARNING ‒ Risk of electric shock!
Improper installation is dangerous.
Connect and operate the appliance only in accord-
▶
ance with the specifications on the rating plate.
Connect the appliance to a power supply with al-
▶
ternating current only via a properly installed socket
with earthing.
The protective conductor system of the domestic
▶
electrical installation must be properly installed.
Never equip the appliance with an external switch-
▶
ing device, e.g. a timer or remote control.
When installing the appliance, check that the power
▶
cable is not trapped or damaged.
If the insulation of the power cord is damaged, this is
dangerous.
Never let the power cord come into contact with hot
▶
appliance parts or heat sources.
Never let the power cord come into contact with
▶
sharp points or edges.
Never kink, crush or modify the power cord.
▶
Place the appliance on a level, solid surface with
1.
sufficient load-bearing capacity.
Ensure that the ventilation slots are clear.
2.
→ "Safety clearances", Page 6
Using the mains plug, connect the appliance to an
3.
earthed socket that has been correctly installed.
6
Advertisement
Table of Contents
