Advertisement
Induction Cooktop Operation
Modes of Operation
LOCK MODE
In lock mode, all touch pad operations on the control
panel are disabled and all induction elements are turned
off. A steady glowing light within the "key" symbol indi-
cates that the cooktop is locked. Refer to the illustration
below.
•
To lock the control panel, touch and hold the key
symbol for 3 seconds. Three chimes will sound and the
light within the key symbol will illuminate. The cooktop
is now in lock mode.
•
To unlock the control panel, touch and hold the key
symbol for 3 seconds. Two chimes will sound and the
light within the key symbol will go out. The cooktop is
now in idle mode.
IMPORTANT NOTE: When the cooktop is powered up for
the first time or if there has been a power outage, the
cooktop will default to lock mode.
IDLE MODE
After unlocking the control panel as described in lock
mode, the cooktop enters the idle mode of operation.
Available touch pad operations include OFF ON for each
element, lock mode and timer functions.
KEY SYMBOL
TOUCH PAD
Lock mode (CT36I/S shown).
Cooktop Operation
INITIAL START-UP
Before using your induction cooktop for the first time,
clean the glass-ceramic surface as recommended in the
cleaning section on page 15. The cooktop surface must
be free of any foreign substances, especially those that
could melt and permanently adhere to the glass-ceramic
surface.
When the cooktop is powered up for the first time it will
default to lock mode. To unlock the control panel, touch
and hold the key symbol for 3 seconds.
IMPORTANT NOTE: A small amount of smoke and odor
may be noticed during the initial break-in period.
10
Advertisement
