Table of Contents
Advertisement
global_main.book.book Page 27 Tuesday, May 25, 2021 11:26 AM
• The current settings are shown in the
display.
• Press the button for that option to
select other settings.
ezDispense Buttons
F
• Press the Dispenser 1 or Dispenser 2
to select ezDispense function.
• LED will light up to indicate the
selected detergent type and amount.
• When the detergent or softener is
insufficient;
- In case of pressing the Power button
: The LED will blink and the chime will
sound.
- In case of running the appliance :
The LED will blink .
ezDispense Nozzle Clean
• Press and hold the Spin button for 3
seconds to use the ezDispense Nozzle
Clean function. Use this function to
change the type of detergent or
softener. This function cleans residual
detergent or softener in the hose
connected to the ezDispense(when
changing the type of detergent or
softener).
Display
G
• The display shows the settings,
estimated remaining time, options,
and status messages. When the
appliance is turned on, the default
settings in the display will illuminate.
• While the load weight is sensed
automatically, the display on the
control panel blinks.
OPERATION
27
Advertisement
Table of Contents
