Table of Contents
Advertisement
global_main.book.book Page 28 Tuesday, May 25, 2021 11:26 AM
OPERATION
28
Time and Status Display
Programme Status Indicators
A
• When a washing programme is
running, LED for the active stage will
blink, and the LEDs for the remaining
stages will remain steady. Once a
stage is complete, the LED will turn off.
If a cycle is paused, the active stage
LED will stop blinking.
AI DD
B
• AI DD
provides the appropriate
M
drum rotation actions after load
sensing is completed.
•
is activated when the Cotton,
M
Mixed Fabric, and Easy Care
programmes are selected and
operated.
- If too much detergent is used, too
many suds can occur and this will
cause poor AI DD performance.
Estimated Time Remaining
C
• When a washing programme is
selected, the default time for that
programme is displayed. This time will
change as options are selected.
• If the display shows
will be displayed after the load sensing
has detected the load size. This is
normal.
, then the time
---
• The time shown is only an estimate.
This time is based on normal operating
conditions. Several external factors
(load weight, room temperature,
incoming water temperature, etc.) can
affect the actual time.
Steam Indicator
D
lights up when the programme uses
\
steam.
Rinse+ Indicator
E
lights up when the Rinse+ option is
G
activated.
Pre Wash Indicator
F
lights up when the Pre Wash option is
d
activated.
Wi-Fi Indicator
G
lights up when the appliance is
f
connected to Wi-Fi network at home.
Door Lock Indicator
H
lights up when the programme starts
H
and the door is locked.
Advertisement
Table of Contents
