Connecting The Appliance To The Home Connect App; Installing The Home Connect Software Update - Gaggenau RT282 User Manual

The temperature display shows an
a
animation. The appliance is ready
for manual connection to the
WLAN home network (WiFi).
Follow the instructions in the
4.
Home Connect app on the mobile
device.
The network information for the
a
WLAN home network (Wi-Fi) is
transferred to the appliance.
Once successfully connected,
a
flashes in the temperature display.
If the temperature display shows
5.
, the appliance was unable to es-
tablish a connection to the WLAN
home network (WiFi).
Check whether the appliance is
‒
located within the range of the
WLAN home network (Wi-Fi).
Repeat the process.
‒
Connecting the appliance to the
Home Connect app
If you have automatically connected
your appliance to your WLAN home
network (Wi-Fi), you can connect
your appliance to the Home Connect
app.
Requirements
The appliance is connected to the
¡
WLAN home network (Wi-Fi).
→ Page 20
The Home Connect app has been
¡
installed on your mobile device.
Press .
1.
The temperature display shows
a
Press repeatedly until the tem-
2.
perature display shows
Press .
3.
The temperature display shows an
a
animation.
4.
a
5.
6.
Installing the Home Connect
software update
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note: If updates are available, the
temperature display shows
To reset the update and the temper-
ature display to the set temperature,
press any touch field.
1.
a
2.
3.
.
a
.
a
a
a
4.
Follow the instructions in the
Home Connect app until the pro-
cess is complete.
Once successfully connected, the
temperature display shows
If the temperature display shows
, the appliance was able to es-
tablish a connection to the
Home Connect app.
In the Home Connect app,
‒
check whether the mobile
device is connected to the
WLAN home network (Wi-Fi).
Repeat the process.
‒
If the temperature display shows
, reset the Home Connect set-
tings.
→ "Resetting Home Connect set-
tings", Page 22
Press .
The temperature display shows
Press repeatedly until the tem-
perature display shows
Press .
The temperature display shows an
animation.
The update is installed.
The controls are locked during the
installation.
If the installation is successful, the
temperature display shows
If the temperature display shows
, the appliance was unable to in-
stall the update.
Home Connect en
.
.
.
.
.
21