Panasonic NA-F80VB7 Operating & Installation Instructions Manual page 13

■ Make sure to ask a service person for installation. Do not install by yourself.
■ If the installation, test run and inspection of the washing machine are not carried out following this installation
method, Panasonic will not be liable for any accident or damage caused.
4. Connect the water tap adaptor and water supply hose.
Water faucet
Water tap adaptor
Water supply hose
CAUTION
● Tighten the nut firmly.
● Do not twist, squash, modify
or cut the hose.
5. Connect the power plug and grounding wire.
● Ask a service person to do the grounding work.
● In case of a 2-pin power cord, establish a ground.
6. Check that the washing machine does not wobble.
■
If the washing machine wobbles
2
Turn the adjustable
leg to eliminate
wobble.
7. Perform a trial operation.
● Check that there is no water leakage, abnormal sounds or error display.
1
Connect the water tap
adaptor to the water
faucet.
1
Turn part A to the left until approx. 4
mm of the thread becomes visible.
2
Loosen the 4 screws.
3
Connect to the faucet and tighten
the screws.
4
Turn part A to the right and tighten
securely. (To prevent water leakage)
2
Connect the water supply
hose to the water tap
adaptor.
Insert the hose into the adaptor while
pushing down the lever, and hook the
claw of the lever on the flange of the
adaptor.
3
Connect the water supply
hose to the water supply
valve screw.
1
Hold the elbow and tighten the nut.
2
Check that the elbow is not loose.
1
Turn the adjustable leg knob to
the left to loosen.
3
Turn to the right to
tighten.
To raise To lower
Screw
Part A
Flange
Thread
Claw
Lever
Water supply hose
Elbow Nut
Water supply
valve screw
13