Installation - Panasonic NA-F80VB7 Operating & Installation Instructions Manual

Installation

1. Check the location.
■
Avoid the following locations for installation.
• Locations with a possibility of freezing
• Damp locations or locations where it may be exposed to rain, etc.
(To prevent electric shock or fire)
• Locations exposed to direct sunlight
(To prevent malfunction or deformation)
• Uneven or unstable locations
(on blocks, timbers, a table with wheels, etc.)
2. Attach the bottom cover.
Preparation: Set a cardboard, etc. and lay the washing
machine on it, avoiding product damage and
deformation. (Face the front side down.)
1
Insert the bottom cover with its
screw hole set at the bottom.
2
Set 6 holes to the corresponding
projections and fix with one screw.
Projection
3. Attach the external drain water hose.
1
Connect.
2
Slide the
hose band
in the arrow
direction.
● Slide all the way
until it stops.
12
Screw hole
Screw hole
Insert all the way.
Hose band
Water tap adaptor
Bottom cover
External drain
water hose
NOTE
● Do not put the
hose tip under
water.
● Do not raise the
hose higher than
10 cm above the
floor.
● Do not extend the
overall length to
more than 3 m.
Water
supply hose
Water supply
valve screw
10 cm or
less
3 m or less