Advanced Osd Adjustment - Philips 220EW8FS/00 Service Manual

Advanced OSD Adjustment

1. Front control panel
2. To Lock/Unlock OSD function
The OSD function can be locked by pressing
for more than 10 seconds, the screen shows following
windows for 3 seconds.
Every time when you press any button, this message
appears on the screen automatically.
ATTENTION
OSD MAIN CONTROLS LOCKED
Locked OSD function can be released by pressing
button for more than 10 seconds. While press
for OSD unlocked purpose, the screen will keep showing
OSD MAIN MENU LOCKED until OSD function unlocked and
screen automatically shows following window for 3 seconds.
ATTENTION
OSD MAIN CONTROLS UNLOCKED
3. Access Factory Mode
To hold AUTO and POWER
light flashing at this time. Then release the
Keep pressing the POWER
and LED light give out orange light. Press
OSD menu for confirmation as below:
220EW8
If this message appeared, means monitor already entered
the factory mode.
Advanced OSD Adjustment
MENU button
MENU
MENU button
buttons, you can saw the LED
AUTO button and
button. The monitor will power on
MENU to bring up
4. Entering Burn-in mode and others
If you access into factory mode, press
the cursor on the message bar of " HUSDON 220WS8 V.34..".
Then press MENU to confirm, OSD menu will convert into
another format as below:
BIOS Revision Scaler IC Type Panel Type BIOS issued date
V0 TSUMU58WHJ
Burn in Off
AutoColor
Con 50
Bri 100
Gain R 88
Offset R 121
sRGB R 97
9300K R 91
6500K R 97
Color Update
Fatory Reset
Move the cursor by MENU button, and press the
button
to change the burn-in mode from Off to ON.
Leave factory mode by simply power off the monitor.
Warning
* If you only want to enter burn in mode, please don't change
any other setting items as above listed.
* Unfortunately, if some settings has been changed by
unknown reasons or wrong operation. Please refer to the
chapter of "W/B Adjustment" to guide the operator how to
restore the default settings or do adjustment.
Appendix:
Explanation of above listed selections.
Selection
Burn in On/Off Enter Aging Mode
Auto Color Auto Color Adjustment
Con Contrast Adjustment
Bri Brightness Adjustment
ADC Gain Value Adjustment
Gain
(Auto adjustment by H/W when implement Auto Color function)
ADC Offset Value Adjustment
Offset
(Auto adjustment by H/W when implement Auto Color function)
sRGB sRGB Color Temperature Gain Value Adjustment
9300K 9300K Color Temperature Gain Value Adjustment
6500K 6500K Color Temperature Gain Value Adjustment
Color Update Save All of Color Temperature Gain Value
Factory Reset Memory Recall to Factory Default Settings
220EW8 LCD
< or > button to move
CLAA220WA01 07/05/09
G 91 B 88
G 131 B 131
G 98 B 82
G 94 B 95
G 98 B 82
< or >
Description
7