Philips 220EW8FS/00 Service Manual page 19

Re-programming Digital DDC IC
Step 1: After initialize the alignment fixture, connecting all
cables as shown in Fig.11.
PC
Monitor(A)
Fig. 11
Step 2: Connect the power code of monitor and power on it.
Step 3: Double check the TVI_TOOL
to run the TV_TOOL.exe.
Step 4: Click the OPEN icon at the main menu
to open the DDC files.
Step 5: Select the icon of DDC IC type and
serial number write-in method.
Step 6: Entering the monitor's serial number into the block
as shown in following photos, program will running
Automatically.
Step 7: When the DDC data download into the DDC IC,
dialog window of main menu will show the message
as below.
Step 8: Press the OK button, waiting for several seconds
and then power off the monitor.
* If the operator don't want to key in
the serial number, he or she can
Keep the option as blank.
Press the WRITE TO IC icon
by program itself.
And select the READ TO IC
EDID contents.
Electronic Instructions
Monitor (B)
icon
to execute the download
icon to check the
User Interface of DDC programming
Toolbar function introduction
Open a DDC file
Save DDC file
Write to IC
Read from IC
Get a exsample
DDC report
Model name option S/N coding rule S/N entering option
Dialog box of DDC data download progress.
220EW8 LCD
Exit the program
a. If the DDC programing under
VGA mode, this dialog box
will show " TSUM ".
B. If the DDC programing under
DVI mode, this dialog box
will show " 24C02 ".
19