Page 1
EC221S & EC221B NO PART OF THIS MANUAL OR DOCUMENT MAY BE COPIED OR RE-PRODUCED IN ANY FORM OR BY ANY MEANS WITH OUT THE EXPRESS WRITTEN PERMISSION OF SMP (PLAYGROUNDS) LTD. - W: smp.co.uk - T: +44(0)845 260 1655...
Page 2
PILLARS OF HERCULES EC221 Page 2 ISSUE C 12-03-2012...
Page 3
PILLARS OF HERCULES EC221 Section 1: x 2= T EC221S 197.00 0.44 2.23 X 0.40 X 2.81 3.00 X 1.00 1.80 m T = 3h EC221B 210.00 0.48 TYPE 1/2/3 101/144 1.80 m 5230 1700R 1500R 1500R 1500R 1500R 1500R...
Page 4
PILLARS OF HERCULES EC221 EC221B TYPE 1/2 101/144 1.80 m 1 LTB11 1980 450 x 450 450 x 450 Section 1 Page 4 ISSUE C 12-03-2012...
Page 5
PILLARS OF HERCULES EC221 EC221S TYPE 3 101/144 1.80 m 1 LTB11 1980 450 X 450 450 X 450 ISSUE C 12-03-2012 Section 1 Page 5...
Page 13
PILLARS OF HERCULES EC221 Appendix A: 5250 2000 2000 1635 2300 2300 TYPE 1/2 LOOSEFILL 5250 2000 2000 1635 2300 2300 TYPE 3 SYNTHETIC ISSUE C 12-03-2012 Appendix A Page 13...
Page 14
PILLARS OF HERCULES EC221 2010 1500 6000 TYPE 5 GRASSMATT FR 1260 1500 4500 TYPE 5 GRASSMATT FR - WEAR AREA Appendix A Page 14 ISSUE C 12-03-2012...
Suitable working platform to provide secure access and provide support for parts required. SPECIFICATIONS SMP Playgrounds Ltd recommends an effective Impact Absorbing Surface tested to EN1177 & BS7188 beneath this play equipment. Refer to manufacturers instructions for details of installation. The surface should have a Critical Fall Height greater than the Maximum Free Fall Height of the equipment.
Page 16
PILLARS OF HERCULES EC221 MARK OUT HOLES Consult SMP layout drawing for structure position on site. See page 4 & 5 for concrete foundation sizes. NOTE: This is a minimum guide only. ESTABLISH DATUM LEVEL If a rubber tiled Impact Absorbing surface is to be laid, see separate instructions (base may incorporate up to 2% falls etc).
PILLARS OF HERCULES EC221 Upon the other Upright Post (item 1 - LTB11), remove the BTN Bolt and it’s fixings, connect the Rope (item 2) to the BTN Bolt using 1 off Pivot Bar (item 5) and M5 X 25 Grub Screw (item 6), utilise 2.5mm AF Allen Key ensuring grub screw goes fully into hole of pivot bar to full depth of BTN fitting.
Page 18
PILLARS OF HERCULES EC221 Appendix A Page 18 ISSUE C 12-03-2012...
Need help?
Do you have a question about the EC221S and is the answer not in the manual?
Questions and answers