Powerboost Function; Restrictions When Using; How To Activate; To Deactivate - Bosch PIP875N14E Instruction Manual

Powerboost function

The Powerboost function can be used to heat large amounts of
water more quickly than the power level

Restrictions when using

This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see picture).
Otherwise, the and symbols will flash on the display of the
› Š
selected hotplate; then the power level
*URXS 



Time programming function

This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■

Turning off a hotplate automatically

Enter the time period for the hotplate. The hotplate turns off
automatically once the time has elapsed.
How to program
Select the required hotplate and power level.
1.
Press the symbol twice.
0
2.
function program display.
In the next 10 seconds, program the required time using
3.
symbols 1 to 9.

The cooking time starts to count.
Once the time has elapsed
The hotplate switches off once this time has elapsed. A beep is
heard and ‹ . ‹ appears in the hotplate and the time
programming function display shows
When the symbol is pressed, the displays turn off and the
0
beep goes off.
Changing or cancelling the time
Select the hotplate and press the
The __ and displays appear
r
Change the cooking time using symbols 1 to 9 or press 0 to
cancel the time.
10
.
Š
is automatically set.
Š



*URXS 
__ light up on the time
‹‹ y

for 10 seconds.
‹‹
symbol twice.
0

How to activate

Select a hotplate.
1.
Press the boost symbol. The function has been turned on.
G
2.

To deactivate

Select a hotplate.
1.
Press the boost symbol. The Powerboost function has
G
2.
been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Notes
If a cooking time has been programmed, the display always
■
shows the time of this function. To check the cooking time
remaining in a hotplate, select a hotplate and press the
symbol twice.
0
If a time has been programmed for several hotplates, the
■
time of the selected hotplate is always shown.
Any cooking time can be programmed for up to 99 minutes.
■

Automatic timer

With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time can be changed or cancelled for any
hotplate:
Press the symbol several times until the
0
required hotplate lights up. Adjust the cooking time with
symbols 1 to 9 or deactivate with the symbol 0.

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the symbol. The indicator
0
1.
in the time program function display.
Set the required time using symbols 1 to 9.
2.
The time starts again after a few seconds.
Once the time has elapsed
Once the time has elapsed, a beep will sound.
displayed in the time program function display. After pressing
the symbol, the indications turn off.
0
Changing or cancelling the time
Press the symbol, the
0 U
Change the time using the 1 to 9 symbols or press 0 to cancel.
indicator of the
$
lights up. lights up
U ‹‹
and
‹‹
indicator lights up.
are
U