Input Source Selection - Christie 38-VIV208-03 User Manual

Computer Input

Input Source Selection

Direct Operation
Choose either Computer 1 or Computer 2 by pressing the INPUT
button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Input Menu icon.
2 Press the Point
either Computer 1 or Computer 2, and then press the
SELECT button.
3 Move the pointer to the correct input source and then press
the SELECT button.
When the input source is analog coming from a
RGB (Analog)
computer through the DVI terminal, select RGB
(Analog).
When the input source is digital coming from a
RGB (PC Digital)
computer through the DVI terminal, select RGB
(PC Digital)
When the input source compatible with HDCP
RGB (AV HDCP)
is coming from video equipment through the
DVI terminal, select RGB (AV HDCP).
When the input source is analog coming from a
RGB
computer through the COMPUTER IN
2/COMPONENT IN/MONITOR OUT terminal,
select RGB.
✔
Note:
• Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/
MONITOR OUT terminal is set as Monitor out. (p44)
• HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital
entertainment content delivered by DVI (Digital Visual Interface) from being copied.
The specification of HDCP is decided and controlled by Digital Content Protection,
LLC. Should the specification be changed, this projector may not display the digital
content protected by HDCP.
7 8 button to move the red frame
d d button to move the red arrow pointer to
INPUT button
Computer 1
✳
Computer 2
Video
COMPUTER button
Computer 1
✳
Computer 2
✳ See Note at the bottom of this page.
Input Menu icon
Input Menu
Move the pointer (red
arrow) to Computer 1
and press the SELECT
button.
✳ See Note at the bottom of this page.
Computer
1
Source Select Menu
Move the pointer to
RGB(Analog), RGB (PC
Digital), or RGB(AV HDCP)
and press the SELECT
button.
Input Menu
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
Computer
2
Source Select Menu
Move the pointer to RGB and
press the SELECT button.
27