Image Level Selection - Christie 38-VIV208-03 User Manual

Video Input

Image Level Selection

Direct Operation
Select a desired image level among Dynamic, Standard, Cinema,
Blackboard (Green), Image 1, Image 2, Image 3, and Image 4 by
pressing the IMAGE button on the remote control.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard(Green)
Picture level suitable for the image projected on a blackboard.
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored board, not
truly effective on a black colored board.
Image 1~4
User preset image in the Image Adjust Menu (p39, 40).
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Image Select Menu icon.
2 Press the Point
the level that you want to set and then press the SELECT
button.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard(Green)
Picture level suitable for the image projected on a Blackboard.
See above for further description.
Image1~4
User preset image in the Image Adjust Menu (p39, 40).
38
7 8 button to move the red frame
d d button to move the red frame pointer to
IMAGE button
Dynamic
Standard
Cinema
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4
Image Select Menu
Move the red frame pointer to a level
and press the SELECT button.
The level being selected.
Image Select
Menu icon