Table of Contents
Advertisement
Step 2: Update the software
Caution
•
Before you connect the USB flash drive to
your home theater, make sure that there is
no disc in the disc compartment, and the disc
compartment is closed.
1
Connect the USB flash drive to your home
theater.
2
Switch your TV to the correct source for
your home theater.
3
Press
(Home), and then select [Setup].
4
Select [Advanced] > [Software Update] >
[USB].
5
Follow the instructions on the TV to
confirm the update.
» When the software update is complete,
the home theater automatically switches
off and restarts. If it does not, disconnect
the power cord for a few seconds, and
then reconnect it.
Note
•
When the software update is in progress, do
not turn off the power or remove the USB
flash drive.
10 Product
specifications
Note
•
Specifications and design are subject to change
without notice.
Region codes
The type plate on the back or bottom of the
home theater shows which regions it supports.
Country
Europe,
United Kingdom
Asia Pacific, Taiwan,
Korea
Latin America
Australia,
New Zealand
Russia, India
China
Media formats
•
AVCHD, BD-RE, BD-Video, DVD-Video,
DVD+R/+RW, DVD-R/-RW, DVD+R/-R
DL, CD-R/CD-RW, Audio CD, Video CD/
SVCD, Picture files, MP3-CD, WMA-CD,
DivX (Ultra)-CD, USB storage device
DVD
BD
C C
C C
EN
31
Advertisement
Table of Contents
