Measurements - ADA INSTRUMENTS Cosmo 100 Operating Manual

COSMO 100 

MEASUREMENTS

Single distance measurement
Press button (1) to activate the laser. When in continuous laser mode, press this button to trigger the distance measure-
ment directly. The instrument will give acoustical signal.
The result is displayed immediately.
Continuous Measurement
Press and hold the button (1) for about 2 seconds to start continuous measuring.
Minimum/ Maximum measurement
This function allows the user to measure the minimum or maximum distance from a fixed measuring point. It is com-
monly used to measure room diagonals (maximum values) or horizontal distances (minimum values).
Press and hold down the button (1), until you will hear acoustical signal. Then slowly sweep the laser back and forth