Preparation; Name Of Each Part Of Projector - Christie 38-VIV202-01 User Manual

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT OF CABINET
PROJECTION LENS
LENS COVER
BACK OF CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When
using or installing the projector, the
following precautions should be taken.
Do not put any flammable object near the
vent.
Keep rear grill at least 3'(1 m) away from any
object, especially heat-sensitive object.
Do not touch this area, especially screws
and metallic parts. This area will become
hot while the projector is used.
This projector detects internal temperature
and automatically controls the operating
power of the Cooling Fans.
BOTTOM OF CABINET
TOP CONTROLS
AND INDICATORS
SPEAKERS
POWER CORD
CONNECTOR
LAMP COVER
ADJUSTABLE FEET
FEET LOCK LATCHES
INFRARED
REMOTE RECEIVER
TERMINALS
AND CONNECTORS
AIR INTAKE VENTS
This projector is equipped with cooling
fans for protection from overheating.
Pay attention to following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
Do not cover vent slots.
AND
Keep side clear of any objects.
Obstructions may block cooling air.
AIR INTAKE
VENT
INFRARED
REMOTE RECEIVER
CARRYING
HANDLE
7