Table of Contents
Advertisement
Covering terminal board
• The recommended cross-section area is six
square millimetres (6 mm²).
• When you refit the mains terminal cover,
make sure that the lower tabs are located
Energy efficiency
Product information for hob according to EU 66/2014
Model identification
Type of hob
Number of cooking zones
Heating technology
Diameter of circular cooking zones
(Ø)
Energy consumption per cooking
zone (EC electric cooking)
Energy consumption of the hob (EC electric hob)
www.zanussi.com
inside the bottom edge of the aperture,
before you fix the two screws into the top
edge of the mains terminal cover.
• Make sure that the cover is securely
fastened.
Terminal board
Make sure that the links are fitted as shown.
ZCV667MNC
ZCV667MWC
ZCV667MXC
Hob inside Freestanding Cooker
4
Radiant Heater
Left front
Left rear
Right front
Right rear
Left front
Left rear
Right front
Right rear
To open the cover of terminal board
obey the procedure in opposite
sequence.
Do not remove blanking plates.
L
L
N
18.0 cm
14.5 cm
14.5 cm
18.0 cm
177.3 Wh/kg
180.3 Wh/kg
180.3 Wh/kg
179.4 Wh/kg
179.3 Wh/kg
N
N
21
Advertisement
Table of Contents
