Electrolux EBGL40CN User Manual page 14

14 www.electrolux.com
When you put the core
temperature sensor into the
socket, you cancel the
settings for the clock
functions.
4. Touch
temperature.
5. Touch
automatically after 5 seconds.
You can set the core
temperature only when
display but does not flash
before you set the core
temperature, touch
and
new value.
6. Set the oven function and the oven
temperature.
The display shows the current core
temperature and the heat up symbol
While the appliance calculates the
approximate duration time, the display
shows the count up time. After the first
calculation the display shows the
approximate duration of the cooking time.
The appliance continues to calculate the
duration during the cooking. The display
updates at intervals with the new duration
value.
When you cook with the core
temperature sensor, you can
change the temperature
shown in the display. After
you put the core temperature
sensor in the socket and set
an oven function and
temperature, the display
shows the current core
temperature.
Touch
see three other temperatures:
or to set the core
or the settings save
flashes. If is in the
or to set a
again and again to
• the set core
temperature
• the current oven
temperature
• the current core
temperature.
When the meat is at the set core
temperature, an acoustic signal sounds for
two minutes and the value of the core
temperature and
deactivates.
7. Touch a sensor field to deactivate the
acoustic signal.
8. Remove the core temperature sensor
from the socket and remove the meat
from the appliance.
WARNING!
Be careful when you remove
the core temperature sensor.
It is hot. There is a risk of
burns.
9.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
.
Baking tray / Deep pan:
Push the baking tray / deep pan between
the guide bars of the shelf support.
Wire shelf and baking tray / deep pan
together:
flash. The appliance