Anynet+ (Hdmi-Cec) Issues - Samsung UA65RU7100W E-Manual

Anynet+ (HDMI-CEC) Issues

When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem
What is Anynet+?
Anynet+ does not work.
I want to start Anynet+.
I also want the connected
devices to turn on when
the TV is turned on.
I want to exit Anynet+.
I also do not want the
connected devices to turn
on and off when the TV is
turned on or off.
The message "Connecting
to Anynet+ device..." or
"Disconnecting from
Anynet+ device" appears
on the screen.
You can use the TV's remote control to control external devices that support Anynet+ (HDMI-
CEC) and that are connected to the TV via an HDMI cable. For example, if a connected external
device supports Anynet+, you can have the connected device turn on or off when you turn the
TV on or off.
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices
only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDMI-CEC)
• Settings
Anynet+ may not function when some other functions are active, including Channel Search,
Smart Hub, Initial Setup, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices again or turn
your TV off and on.
Move the focus to the Anynet+ device at
move to Anynet+ (HDMI-CEC), and then press the Select button.
Check if the Anynet+ device is properly connected to the TV, and then select
CEC) menu to see if Anynet+ (HDMI-CEC)
• Settings
Turn off the Anynet+ (HDMI-CEC)
• Settings
You cannot use the remote control when the TV is configuring Anynet+ or switching to the TV
viewing screen.
Use the remote control after the TV has completed the Anynet+ configuration or has switched
to the TV viewing screen.
Try this!
and see if Anynet+ (HDMI-CEC)
General External Device Manager
is set to On.
General External Device Manager
function.
General External Device Manager
- 138 -
has been set to On.
Anynet+ (HDMI-CEC)
Source, press the up directional button to
Anynet+ (HDMI-
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)