Front Panel Led And Buttons - Gigabyte R152-Z31 User Manual

2-3

Front Panel LED and Buttons

R152-Z30
No. Name
1.
NMI button
2.
Reset Button
LAN 1/2
3/4
Active/Link
LEDs
HDD Status
5.
LED
System
6.
Status LED
7.
ID Button
Power button
8.
with LED
System Appearance
NMI
RST
L1 L2
2 3 4
1
Color Status
Green Solid On
Green Blink
N/A Off
On
Green
Blink
Amber On
Green/
Blink
Amber
N/A Off
Green Solid On
Solid On
Amber
Blink
N/A Off
Green On
Green Blink
N/A Off
SYS
ID
5 6
7 8
Description
Press the button server generates a NMI to the processor
if the multiple-bit ECC errors occur, which effectively halt
the server.
Press the button to reset the system.
Link between system and network or no access.
Data trasmission or receiving is occuring
No data transmission or receiving is occuring
HDD locate
HDD access
HDD fault
HDD rebuilding
No HDD access or no HDD fault.
System is operating normally.
Critical condition, may indicate:
System fan failure
System temperature
Non-critical condition, may indicate:
Redundant power module failure
Temperature and voltage issue
Chassis intrusion
System is not ready, may indicate:
POST error
NMI error
Processor or terminator missing
Press the button to activate system identification
System is powered on
System is in ACPI S1 state (sleep mode)
• System is not powered on or in ACPI S5 state
(power off)
• System is in ACPI S4 state (hibernate mode)
- 20 -