Door Swing - U-Line U-BI1215B-00A Quick Start Manual

QUICK START GUIDE
1. Turn off water supply and disconnect electrical supply
to product prior to attempting installation.
2. Remove the back panel.
3. Locate water valve inlet.
4. Break away filler feature
in bushing with flat
screwdriver.
5. Thread water line
through back panel hole
(with bushing).
6. Locate water valve inlet
and connect to valve.
7. Turn on water supply
and check for leaks.
8. Reinstall back panel.
9. Install retaining clip.

Door Swing

1200 SERIES
Remove
screwdriver
Door Swing
Units have a zero clearance for the door to open 90°,
when installed adjacent to cabinets.
Stainless Steel and black and white models require 2-1/8"
(54 mm) door clearance to accommodate the handle if
installed next to a wall.
9
Wall
1/4" Min.
(6 mm)
90°
Door Swing
u-line.com
Wall
2-1/8" Min.
(54 mm)
90°