Table of Contents
Advertisement
Getting to know your appliance
en
EcoClean
p
--------
Temperature
Use the temperature selector to set the temperature in
the cooking compartment. You can also use it to select
the settings for other functions.
For temperature settings above 250 °C, the appliance
reduces the temperature to approx. 240 °C after
approx. 10 minutes. If your appliance has the top/
bottom heating or bottom heating types, this reduction
does not take place.
Position
"Off" position
Ú
50-275
Temperature
range
1, 2, 3
Grill settings
or
I, II, III
Programmes
%
EcoClean
p
--------
Temperature indicator
The line at the bottom of the display turns red in three
increments, from left to right, as the cooking
compartment heats up.
When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
as soon as all three sections of the line have turned red.
When the appliance is in operation, one of the red
sections of the line will go out during the heating
phases.
Due to thermal inertia, the temperature displayed
Note:
may be slightly different to the actual temperature inside
the oven.
Burner knob
You can adjust the heat setting of the hotplates using
the four burner knobs.
Positions
Zero position
þ
Ignition position
8
Settings area
—
˜
There is a limit stop at the end of the settings range.
Please do not turn the knob beyond this point.
14
Meaning
The appliance is not heating.
The temperature that can be set in the
cooking compartment in °C.
The configurable settings for the grill,
large area
(
and small area
(depending on the appliance model).
Setting 1 = low
Setting 2 = medium
Setting 3 = high
The setting for the programme func-
tion.
The setting for the cleaning function.
Function/gas oven
The hotplate is switched off.
Ignition position
Large flame = highest setting
Economy flame = lowest setting
The EcoClean cleaning function cleans the cooking compartment almost by itself.
~ "Cleaning function" on page 29
LED lighting button
You can use this button to switch on the LED lighting on
the glass cover.
The LED lighting on the glass cover is operated as
follows:
*
The glass cover on your appliance is equipped with
maintenance-free LED lighting.
Press the LED lighting button to switch the glass cover's
LED lighting on.
Press this button again to switch the lighting off.
The lighting on the appliance must only be repaired by
our after-sales service or by authorised technicians.
Closing the glass cover while pressing the
Note:
lighting button will switch the LED lighting off. The LED
lighting will switch back on when the cover is opened
again.
Advertisement
Table of Contents
