Yamaha Aventage RX-A8A User Manual page 432

APPENDIX > Specifications
Rated Output Level/Output Impedance
PRE OUT
(
Front L/R, Center, Surround L/R, Surround Back L/R, Front Presence L/R, Rear Presence L/R
(
(1 kHz)
Subwoofer 1/2 (50 Hz)
(
Front (Balance) L/R
(
ZONE2/3 OUT
(
Maximum Output Level
PRE OUT
(
Front L/R, Center, Surround L/R, Surround Back L/R, Front Presence L/R, Rear Presence L/R
(
Subwoofer 1/2
(
Front (Balance) L/R
(
Headphone Impedance
Frequency Response
AUDIO 2 etc. to Front (Pure Direct) (10 Hz to 100 kHz)
(
RIAA Equalization Deviation
PHONO (20 Hz to 20 kHz)
(
Total Harmonic Distortion
PHONO to PRE OUT (Pure Direct) (1 kHz, 1 V)
(
AUDIO 2 etc. to Front (Pure Direct) (20 Hz to 20 kHz, 75 W, 8 Ω)
(
Signal to Noise Ratio (IHF-A Network)
PHONO (Pure Direct) (Input 1 kΩ Shorted, Speaker Out)
(
AUDIO 2 etc. (Pure Direct) (Input 1 kΩ Shorted, Speaker Out)
(
Residual Noise (IHF-A Network)
Front L/R (Speaker Out)
(
Channel Separation
PHONO (Input 1 kΩ Shorted, 1 kHz/10 kHz)
(
AUDIO 2 etc. (Input 1 kΩ Shorted, 1 kHz/10 kHz)
(
Volume Control
Main Zone
(
Zone2 (Speaker Out)
(
Zone2 (PRE OUT)
(
Zone3 (Speaker Out)
(
Zone3 (PRE OUT)
(
* This is the maximum value on the condition: digital input, Tone Control Bypass, Compressed Music Enhancer Off. It does
not go up to the maximum under the other conditions.
432
110 dB or more
75 dB/60 dB or more
75 dB/61 dB or more
MUTE, -80 dB to +16.5 dB (0.5 dB Step)
MUTE, -80 dB to +16.5 dB (0.5 dB Step)
MUTE, -80 dB to +10.0* dB (0.5 dB Step)
MUTE, -80 dB to +16.5 dB (0.5 dB Step)
MUTE, -80 dB to +10.0* dB (0.5 dB Step)
1.0 V/470 Ω
1.0 V/470 Ω
2.0 V/470 Ω
470 mV/470 Ω
2.0 V
6.5 V
4.0 V
16 Ω or more
+0/-3 dB
0±0.5 dB
0.04% or less
0.05% or less
95 dB or more
150 μV or less