Yamaha Aventage RX-A8A User Manual page 311

CONFIGURATIONS > Configuring various functions (Setup menu)
Automatically setting the input source names
Automatically sets the input source names depending on the connected external device.
Setup menu
"System" > "Input Rename" > (input)
1
Select an input source to be renamed.
2
Select "Auto".
3
To change another input source name, repeat steps 1 to 2.
4
Press SETUP.
This completes the settings.
NOTE
When "Auto" is selected, the created name is saved even after the external device is disconnected. To reset to the default setting, with
no connection to the corresponding input jack, switch the setting to "Manual" and then back to "Auto".
Related links
"Basic operation of the Setup menu" (p.213)
311