Table of Contents
Advertisement
Quick Links
Symbol
Please observe all safety precautions listed below.
WARNING：
This may cause an accident resulting in injury or death if it is not observed.
CAUTION：
This may cause injury, damage or trouble to the air tool or equipment if it is not followed.
WARNING
To reduce risk of injury, everyone using, installing. repairing, maintaining changing accessories on, or working
near this tool MUST read and understand these instructions before performing any such task.
Do not use an Air Breaker until this safety instruction has been read and understood completely.
This manual is necessary to help you to use the Air Breaker correctly.
WARNING
Do not use an Air Breaker before reading this safety instruction manual.
Obey all of the safety measures indicated in this manual
FOR DETAILED INFORMATION ABOUT TOKU AIR TOOLS AND EQUIPMENT
CONTACT TO：
TOKU PNEUMATIC TOOL CO., LTD.
3-4, 4-Chome Katakasu, Hakata-Ku, Fukuoka 812-0043 Japan
Phone：+81-92-431-0401
E-mail：int-op@toku-net.co.jp
OPERATOR'S INSTRUCTIONS
AND PARTS LIST
AIR CONCRETE BREAKER
MODEL
FAX：+81-92-431-1014
URL：http://www.toku-net.co.jp/en/
1
TPB-90
DO NOT DISCARD-GIVE TO USER
7th edition
Advertisement
Table of Contents
Related Manuals for Toku TPB-90
Summary of Contents for Toku TPB-90
- Page 1 WARNING Do not use an Air Breaker before reading this safety instruction manual. Obey all of the safety measures indicated in this manual FOR DETAILED INFORMATION ABOUT TOKU AIR TOOLS AND EQUIPMENT CONTACT TO： TOKU PNEUMATIC TOOL CO., LTD. 3-4, 4-Chome Katakasu, Hakata-Ku, Fukuoka 812-0043 Japan Phone：+81-92-431-0401...
- Page 2 Safety precaution when using an Air Tool Always obey the law and the safety regulations during work. Always wear proper clothing and use other protective equipment when operating an air tool. WARNING Always wear ear protection to prevent possible ear damage when operating an air tool at high noise level or for a long time.
- Page 3 Hose connection WARNING Install the metallic cap of the air hose onto the body of the air tool firmly. The metallic cap will come off and cause the hose to run amuck due to vibration if the metallic cap is used in a loose condition. This will be very dangerous.
- Page 4 Operator’s instruction Preparations before operation Check following matters before operation. Compressor Capacity of the compressor is sufficient. Minimum requirement 25hp, 80CFM at 90psig (6.2bar) Whether the drain has been removed. Air Hose Whether there is any damage to the air hose. Whether the size and length is correct. Clean the interior of the air hose using compressed air.
- Page 5 If everything else appears to be in order, then disassemble tool, replace worn or damaged parts, clean, reassemble and lubricate. Replacement parts Always use GENUINE TOKU TOOL Replacement Parts. When replacement parts are required, order by Part Number and Description from the Parts List.
- Page 6 TPB-90 Parts List Exploded View 7th edition...
- Page 7 TPB-90 MUST REPLACE 100% HIGH WEAR Spare Parts Service Chart MEDIUM WEAR LOW WEAR NON WEAR SUBJECT TO EXTERNAL DAMAGE Symbol Q'ty Parts No. Description Req. This service chart is a guide to 410271010 Cylinder expectant life of component parts.
- Page 8 Location of Serial number, Year of manufacture and Name plate...
Need help?
Do you have a question about the TPB-90 and is the answer not in the manual?
Questions and answers