Download Print this page
Toku TS-55 Operator's Instructions/Spare Parts List

Toku TS-55 Operator's Instructions/Spare Parts List

Air hand hammer

Advertisement

Quick Links

Symbol
Please observe all safety precautions listed below.
WARNING:
This may cause an accident resulting in injury or death if it is not observed.
CAUTION:
This may cause injury, damage or trouble to the air tool or equipment if it is not followed.
WARNING
To reduce risk of injury, everyone using, installing. Repairing, maintaining changing accessories on, or working
near this tool MUST read and understand these instructions before performing any such task.
Do not use a Rack Drill until this safety instruction has been read and understood completely.
This manual is necessary to help you to use the Rock Drill correctly.
WARNING
Do not use a Rock Drill before reading this safety instruction manual.
Obey all of the safety measures indicated in this manual
FOR DETAILED INFORMATION ABOUT TOKU AIR TOOLS AND EQUIPMENT
CONTACT TO:
TOKU PNEUMATIC TOOL CO., LTD
3-4, 4-Chome Katakasu, Hakata-Ku Fukuoka 812-0043 Japan
Phone:+81-92-431-0401
E-mail:int-op@toku-net.co.jp URL:http://www.toku-net.co.jp/en/
OPERATOR'S INSTRUCTIONS
AND PARTS LIST
AIR HAND HAMMER
MODEL
FAX:+81-92-431-1014
1
TS-55
DO NOT DISCARD - GIVE TO USER
6th edition

Advertisement

loading
Need help?

Need help?

Do you have a question about the TS-55 and is the answer not in the manual?

Questions and answers

Summary of Contents for Toku TS-55

  • Page 1 WARNING Do not use a Rock Drill before reading this safety instruction manual. Obey all of the safety measures indicated in this manual FOR DETAILED INFORMATION ABOUT TOKU AIR TOOLS AND EQUIPMENT CONTACT TO: TOKU PNEUMATIC TOOL CO., LTD 3-4, 4-Chome Katakasu, Hakata-Ku Fukuoka 812-0043 Japan Phone:+81-92-431-0401...
  • Page 2 Safety precaution when using an Air Tool Always obey the law and the safety regulations during work. Always wear proper clothing and use other protective equipment when operating an air tool. WARNING Always wear ear protection to prevent possible ear damage when operating an air tool at high noise level or for a long time.
  • Page 3 Hose connection WARNING Install the metallic cap of the air hose onto the body of the air tool firmly. The metallic cap will come off and cause the hose to run amuck due to vibration if the metallic cap is used in a loose condition. This will be very dangerous.
  • Page 4 Operator’s instruction Preparations before operation Check following matters before operation. Compressor Capacity of the compressor is sufficient. Whether the drain has been removed. Air Hose Whether there is any damage to the air hose. Whether the size and length is correct. Clean the interior of the air hose using compressed air.
  • Page 5 If everything else appears to be in order, then disassemble tool, replace worn or damaged parts, clean, reassemble and lubricate. Replacement parts Always use GENUINE TOKU TOOL Replacement Parts. When replacement parts are required, order by Part Number and Description from the Parts List.
  • Page 6 Air consumption at air pressure of 600kPa 2.6 m /min Sound levels (ISO 15744) 108.43 dB(A) Sound pressure level Uncertainty Sound power level 119.43 dB(A) 3 dB Vibration value (ISO 28927-10) Uncertainty Declared vibration emission value 25 m/s 3.0 m/s Location of Serial number, Year of manufacture and Name plate...
  • Page 7 MEMO...
  • Page 8: Ec Declaration Of Conformity

    (4) declare that the product(s) : ROCK DRILL (5) Model/Type : S-55 (6) Version(s) : S-55, TS-55, PK 280 L (7) Starting Serial No. : 11J001 (8) is in conformity with the requirement of the council Directives on the approximation of the laws of the Member States relating :...
  • Page 9: Français (French)

    ITALIANO (ITALIAN) (1) DICHIARAZIONE DI CONFORMITÀ CE - (2) La Società : TOKU - (3) File tecnico disponibile dal - (4) dichiara che il(i) prodotto(i) : - Perforatore - (5) tipo : - (6)version : (7) avente numeri di serie che partono dul suffiss : (8) è...
  • Page 10 TS-55 Parts List Exploded View 6th edition...
  • Page 11 TS-55 MODEL CODE SHANK SIZE 53-03-01 7/8”×3-1/4” 53-03-02 7/8”×4-1/4” 53-03-06 1”×4-1/4” Symbol Q’ty Symbol Q’ty Description Description Parts No. Parts No. Req. Req. 43-03-01-A0B BACK HEAD CP 43-03-01-H30 PAWL PLUNGER 43-03-01-A00 BACK HEAD 13-08-03-036 PAWL SPRING 43-03-01-A10 BACK HEAD BUSHING...
  • Page 12 MEMO...