Download Print this page

Replacement Filter - Fantech PHS300 Installation And Operation Manual

Portable filtration unit

Advertisement

Available languages

Available languages

6
General Maintenance Information
WHEN SHOULD I SERVICE
MY UNIT?
SERVICE AND ACCESSORIES
Detailed maintenance information is located on the
front decal on motor plate.
PRE-FILTER WITH CARBON (463046)
Replace filters every 3 to 6 months or as needed.
HEPA FILTER (463048)
Replace filter every 2 to 5 years or as needed.
Check regularly to maintain maximum performance
from your
HVAC system.
For replacement filters, contact your local HVAC
contractor.
INSIDE THE UNIT
Once a year or as needed, clean the interior of the
unit (Wall and Motor Plate) with a mild and non-
abrasive soap. It is recommended to use products
that are environmentally friendly.
Tips to homeowner/installer
ALWAYS UNPLUG UNIT
BEFORE SERVICING
fantech
CHANGING FILTERS
After opening the unit's
door, grasp both edges of
filter and pull with equal
force to slide out the
filter.
TROUBLESHOOTING
TROUBLESHOOTING
Unit does not operate
Unit operates only on one speed.
Unit vibrates
ELECTRICAL WIRING DIAGRAM
CLEANING
Once a year or as needed,
clean the interior of the
unit (Wall and motor
plates) using mild non-
abrasive soap and water.
It is recommended to
use products that are
environmentally friendly.
SUGGESTIONS
• Is power cord fully inserted in the unit's
connector?
• Is outlet powered?
• Is door interlock switch operating?
Possible loose wire inside electrical box, contact
you local contractor.
Check for excessive dust build up or missing
balancing weight on the impeller wheel.

Advertisement

loading