Table of Contents
Advertisement
4 Menu
4.1 HCVR Settings
4.1.1 Control Coaxial Device
This HDCVI camera series can adjust OSD menu via coaxial control. After connected the
camera to the HDCVI series HCVR, from Main Menu->Setting->System->PTZ, you need to
select the channel number for access and set control mode as HDCVI and the protocol as HD-
CVI. Click "Save" button to save current setup. See Figure 4-1.
Figure 4-1
4.1.2 Set Audio Coax
From "Main Menu > Setting > Camera > Encode > Encode", you need to set "Audio Format" as
"G711a" and the "Audio Source" as "HDCVI". See Figure 4-2 for more details.
11
Advertisement
Table of Contents
