Table of Contents
Advertisement
1. Disconnect the power supply cord.
2. Open the door and block it open.
3. Make sure that the smooth surface of the ceramic shelf
face up.
4. Make sure that the rubber packing without a fin of the
ceramic shelf faces the front of the oven.
NOTE: The three (3) rubber packings with the fins and the
one (1) rubber packing without a fin are attached to
the four (4) edges of the ceramic shelf. The one (1)
rubber packing without a fin is the front edge of the
ceramic shelf.
5. Put the front edge of the ceramic shelf into the front edge
of the oven cavity bottom plate.
6. Push down the rear edge of the ceramic shelf into the
oven cavity bottom plate.
7. Now, the ceramic shelf is installed.
INSTALLATION OF CERAMIC SHELF
31
WARNING
Make sure that the rubber packing is not caught between
the oven door and the oven cavity front plate, to avoid
possible exposure to excessive microwave energy.
Oven Cavity
Front Edge
R-21HT
R-21HV
Rear Edge
Push
Ceramic
Shelf
Advertisement
Table of Contents
