Sitecom WLX-3000B Manual page 41

All manuals and user guides at all-guides.com
Key1 - Key4 The WEP keys are used to encrypt data transmitted in the wireless
network. Use the following rules to setup a WEP key on the device. 64-bit WEP: input
10-digits Hex values (in the "A-F", "a-f" and "0-9" range) or 5-digit ASCII character
as the encryption keys. 128-bit WEP: input 26-digit Hex values (in the "A-F", "a-f"
and "0-9" range) or 13-digit ASCII characters as the encryption keys.
Click "Apply" at the bottom of the screen to save the above configurations. You can
now configure other sections by choosing Continue, or choose Apply to apply the
settings and reboot the device.
WPA Pre-shared Key
Wi-Fi Protected Access (WPA) is an advanced security standard. You can use a pre-
shared key to authenticate wireless stations and encrypt data during communication.
It uses TKIP or CCMP (AES) to change the encryption key frequently. So the
encryption key is not easy to be cracked by hackers. This is the best security
available.
WPA-Radius