Sitecom WLX-3000B Manual page 37

All manuals and user guides at all-guides.com
RTS Threshold When the packet size is smaller then the RTS threshold, the wireless
router will not use the RTS/CTS mechanism to send this packet.
Beacon Interval is the interval of time that this wireless router broadcasts a beacon.
A Beacon is used to synchronize the wireless network.
Data Rate The "Data Rate" is the rate that this access point uses to transmit data
packets. The access point will use the highest possible selected transmission rate to
transmit the data packets.
N Data Rate The "Data Rate" is the rate that this access point uses to transmit
data packets for N compliant wireless nodes. Highest to lowest data rate can be fixed.
Channel Bandwidth is the range of frequencies that will be used.
Preamble Type The "Long Preamble" can provide better wireless LAN compatibility
while the "Short Preamble" can provide better wireless LAN performance.
CTS Protection: It is recommended to enable the protection mechanism. This
mechanism can decrease the rate of data collision between 802.11b and 802.11g
wireless stations. When the protection mode is enabled, the throughput of the AP will
be a little lower due to a lot of frame-network that is transmitted.
TX Power can be set to a bare minimum or maximum power.