Table of Contents
Advertisement
All manuals and user guides at all-guides.com
802.1d Spanning Tree is Disabled by default. If the 802.1d Spanning Tree function is
enabled, this router will use the spanning tree protocol to prevent network loops.
DHCP Server Enabled by default. You can enable or disable the DHCP server. When
DHCP is disabled no ip-addresses are assigned to clients and you have to use static ip-
addresses. When DHCP server is enabled your computers will be assigned an ip-
address automatically until the lease time expires.
Lease Time Forever. In the Lease Time setting you can specify the time period that
the DHCP lends an IP address to your LAN clients. The DHCP will change your LAN
client's IP address when this time threshold period is reached.
IP Address Pool You can select a particular IP address range for your DHCP server to
issue IP addresses to your LAN Clients.
Note: default IP range is 192.168.0.100 ~ 192.168.0.200. If you want your
PC(s) to have a static/fixed IP address, then you'll have to choose an IP
address outside this IP address Pool
Domain Name You can specify a Domain Name for your LAN or just keep the default
(sitecomwlx3000B).
Advertisement
Table of Contents
Need help?
Do you have a question about the WLX-3000B and is the answer not in the manual?
Questions and answers