View Or Change The Router Ethernet Port Aggregation Mode.98 - NETGEAR Nighthawk AXE1000 User Manual

Nighthawk AXE1000/AXE11000 Tri-Band WiFi 6E Router
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
d. Select ADVANCED > Advanced Setup > Ethernet Port Aggregation.
The Ethernet Port Aggregation page displays.
e. Select an Ethernet port aggregation mode (note that Ethernet port aggregation
is disabled by default):
• Enable (LACP-IEEE 802.3ad). After you connect the Ethernet cables (see the
following step), the router communicates with the LAN device that is connected
to Ethernet ports 3 and 4 on your router, and checks to see if Ethernet port
aggregation is supported on the LAN device. If Ethernet port aggregation is
supported, the router automatically trunks Ethernet ports 3 and 4. If not,
Ethernet ports 3 and 4 work as independent Ethernet ports. We recommend
that you select this mode unless your LAN device can support a static LAG
only.
• Static. If your device supports a static LAG only, select this mode. Otherwise,
we recommend that you to select the Enable (LACP-IEEE 802.3ad) radio
button instead.
f. Click the Apply button.
Your settings are saved.
3. Connect your LAN device to Ethernet ports 3 and 4 on the router.
View or Change the Router Ethernet Port Aggregation
Mode
To view or change your router's Ethernet port aggregation mode:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Ethernet Port Aggregation.
Manage Network Settings 98 User Manual