NETGEAR RAXE300 User Manual page 75

Nighthawk AXE7800 Tri-Band WiFi 6E Router Model RAXE300
6. Enter the following WPA/WPA2 Enterprise settings:
• Encryption mode. From the Encryption Mode menu, select the enterprise mode:
- WPA2 [AES]. This is the default mode. WPA2 provides a secure connection
but some older WiFi devices do not detect WPA2 and support only WPA. If
your network includes such older devices, select WPA [TKIP] + WPA2 [AES]
security.
- WPA [TKIP] +WPA2 [AES]. This type of security enables WiFi devices that
support either WPA or WPA2 to join the router's WiFi network.
• RADIUS server IP Address. Enter the IPv4 address of the RADIUS server to which
the WiFi network can connect.
• RADIUS server Port. Enter the number of the port on the router that is used to
access the RADIUS server for authentication. The default port number is 1812.
• RADIUS server Shared Secret. Enter the shared secret (RADIUS password) that
is used between the router and the RADIUS server during authentication of a
WiFi user.
7. Click the Apply button.
Your settings are saved.
8. Make sure that you can reconnect over WiFi to the network with its new security
settings.
If you cannot connect over WiFi, check the following:
• If your computer or mobile device is already connected to another WiFi network
in your area, disconnect it from that WiFi network and connect it to the WiFi
network that the router provides.
Some WiFi devices automatically connect to the first open network without WiFi
security that they discover.
• If your computer or mobile device is trying to connect to your network with its
old settings (before you changed the settings), update the WiFi network selection
in your computer or mobile device to match the current settings for your network.
• Does your computer or mobile device display as an attached device?
If it does, it is connected to the network.
• Are you using the correct network name (SSID) and password?
Manage WiFi Settings 75 User Manual