Add A Port Triggering Service - NETGEAR RAXE300 User Manual

Nighthawk AXE7800 Tri-Band WiFi 6E Router Model RAXE300

Add a port triggering service

To add a port triggering service:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The page adjusts.
6. Click the Add Service button.
The Port Triggering - Services page displays.
7. In the Service Name field, type a descriptive service name.
8. From the Service User menu, select a user option:
• Any (the default) allows any computer on the Internet to use this service.
• Single address restricts the service to a particular computer.
9. From the Service Type menu, select TCP or UDP.
This selection sets the service type for the outbound connection.
10. In the Triggering Port field, enter the number of the outbound traffic port that will
open the inbound ports.
11. From the Connection Type menu , select TCP, UDP, or TCP/UDP.
This selection sets the service type for the inbound connection. If you are not sure,
select TCP/UDP.
12. In the Starting Port and Ending Port fields, enter the numbers of the inbound traffic
ports.
13. Click the Apply button.
Manage port forwarding and
port triggering
169 User Manual