NETGEAR RAXE300 User Manual page 12

Nighthawk AXE7800 Tri-Band WiFi 6E Router Model RAXE300
Table 1. LED descriptions
LED and Button
Power LED
Internet LED
2.4 GHz WiFi LED
5 GHz WiFi LED
6 GHz WiFi LED
LAN ports 1–4 LEDs
Hardware Setup
Description
Solid white: The router is ready.
Solid Amber: The router is booting.
Blinking amber: Firmware is upgrading, or the router is being reset to factory
defaults.
Off: Power is not supplied to the router.
Solid white: The Internet connection is ready.
Blinking white: The port is sending or receiving traffic.
Solid Amber: An Ethernet cable is connected to the Internet port but the Internet
connection is not ready.
Blinking amber: The traffic meter is enabled and the traffic limit is almost
reached.
Off: No Ethernet cable is connected between the router and the modem.
Solid white: The 2.4 GHz WiFi radio is operating.
Blinking white: The router is sending or receiving WiFi traffic.
Off: The 2.4 GHz WiFi radio is off.
Solid white: The 5 GHz WiFi radio is operating.
Blinking white: The router is sending or receiving WiFi traffic.
Off: The 5 GHz WiFi radio is off.
Solid white: The 6 GHz WiFi radio is operating.
Blinking white: The router is sending or receiving WiFi traffic.
Off: The 6 GHz WiFi radio is off.
The LED color indicates the speed: white for 1 Gbps Ethernet connections and
amber for 100 Mbps or 10 Mbps Ethernet connections.
Solid white: The router detected a 1 Gbps link with a powered-on device.
Blinking white: The port is sending or receiving traffic at 1 Gbps.
Solid amber: The router detected a 100 Mbps or 10 Mbps link with a
powered-on device.
Blinking amber: The port is sending or receiving traffic at 100 Mbps or 10 Mbps.
Off: No device is connected to this Ethernet port.
12 User Manual