Table of Contents
Advertisement
Connections
Connecting to a TV
• Make one of the following connections, depending on
the capabilities of your existing equipment.
ips
• Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the unit. Use one of the connections described below.
• Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the unit is connected directly to the TV.
Select the correct AV input on your TV.
– Do not connect your unit to TV via your VCR. The
DVD image could be distorted by the copy protection
system.
Video connection
Connect the VIDEO OUT jack from the unit to the
VIDEO IN jack on the TV using the video cable supplied
(V).
S-Video connection
Connect the S-VIDEO OUT jack on the unit to the S-
VIDEO IN jack on the TV using the S-Video cable (S).
Component Video (Color Stream
Connect the COMPONENT VIDEO OUT (PROGRES-
SIVE SCAN) (Y Pb Pr) jacks from the unit to the corre-
sponding in jacks on the TV using an Y Pb Pr cable (C).
SCART connection
1 1
Connect the EURO AV TO TV connector on the unit
to the corresponding in jacks on the TV by using
the scart cable (T).
2 2
In order to receive the TV audio signal press the
AUX button on the front panel or the remote control
until the "TV-AUDIO" indicator is displayed in the
display window.
ote
A picture via scart input is not supported.
Caution
VIDEO OUT SELECTOR switch
In power-off status, select either COMPO-
NENT VIDEO OUT (PROGRESSIVE SCAN)
or SCART signal of EURO AV TO TV terminal
depending on how to connect the unit to the
TV.
6
Progressive Scan (ColorStream
• If your television is a high-definition or "digital ready"
television, you may take advantage of this unit's
progressive scan output for higher video resolution.
• If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the unit.
Connect the COMPONENT VIDEO OUT (PROGRES-
SIVE SCAN) (Y Pb Pr) jacks from the unit to the corre-
sponding in jacks on the TV using an optional Y Pb Pr
cable (C).
otes
– Set the Progressive to "On" in the Setup menu for
progressive signal, see page 17.
– Progressive Scan can not be selected in the setup
menu when the VIDEO OUT SELECTOR switch is set
at SCART position.
COMPONENT
®
) connection
Pr
Y
C
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Pr
pro) connection
®
EURO AV
VIDEO OUT
TO TV
(PROGRESSIVE SCAN)
Pb
S-VIDEO
OPTICAL
OUT
IN
WOOFER
PRE-OUT
C
REAR
REAR
CENTER
WOOFER
FRONT
FRONT
H
R (8 )
L (8 )
(8 )
(3 )
R (4 )
L (4 )
A
N
N
E
L
MIC ANT.
AUX IN
T
V
VIDEO
IN
Y
Pb
L
Rear of TV
S
S-VIDEO
IN
Advertisement
Table of Contents
