Before Operation - LG LM-K7961KZ Owner's Manual

Before Operation

Volume Adjustment
• Turn VOLUME knob clockwise to increase the sound
level, or counterclockwise to decrease it.
• Press VOLUME + to increase the sound level, or use
VOLUME - to decrease it on the remote control.
MUTE
Press MUTE to turn off the sound, press again to
restore.
" " indicator flashes in the display window.
Headphone Jack
Connect a stereo headphone plug ( 3.5mm) into the
headphone jack.
The speakers are automatically disabled when you plug
in headphones (not supplied).
EQUALIZER Effect
You can choose 7 fixed sound impressions and adjust
the BASS, MIDDLE and TREBLE.
- You can select a desired sound mode by using EQ
master button on the front panel or the remote
control.
When you want to change a sound mode press the
EQ master button repeatedly within 3 seconds.
Each time you press the button the setting changes in
the display window as shown below.
NORMAL → USER EQ → POP → CLASSIC
↑
←
JAZZ DRAMA
- You can set the BASS, MIDDLE and TREBLE on the
USER EQ mode.
1. Select the USER EQ mode by using EQ master
button.
"USER EQ" will be displayed in the display window.
2. Press the SET/CD [[ button on the front panel when
"USER EQ" is displayed in the display window.
"BASS 0" will be displayed in the display window.
3. Select the BASS, MIDDLE or TREBLE you want by
pressing the PRESET (-/+) buttons on the front
panel.
4. Press the TUNING (-/+) buttons on the front panel
to set the sound level you want. (MIN, -4 ~ +4,
MAX steps)
5. Repeat the 3-4 steps as above.
6. When the sound level is completed, press the the
SET/CD [[ button on the front panel.
DEMO
Press DEMO in power off state to demonstrate the
function in the display window.
To cancel, press POWER ( STANDBY/ON) or DEMO
again.
12
XDSS (Extreme Dynamic Sound System)
You can improve the sound quality during playback.
Press XDSS plus repeatedly on the remote contol.
DVD/VCD/DivX/CD
MP3/WMA
XTS/XTS pro
Each time you press XTS pro the setting changes in
the following order.
XTS ON → NORMAL → XTS-P ON → XTS ON ...
• XTS-P ON
The unique sound quality of the LG Technology cre-
ates the optimum sound for you to play the perfect
playback of the original sound and to feel the living
sound source.
• XTS ON
When playing the movie with the weak bass sound
relatively to the general music, it enforces the sense
of sound at woofer for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the high dis-
play effect by playing the sound source via the rear
speakers same as the front speakers.
otes
•
The XTS mode is temporarily disabled when changing from 2.1
CH to 5.1 CH and it is enabled when changing it to 2.1 CH.
•
This function does not work when the microphone is in use.
VIRTUAL sound
←
ROCK
Press VIRTUAL E.X the setting VIRTUAL sound.
• 3D STEREO
Realtime 3D positioned sound rendering technology
with stereo sources, optimized for stereo speakers.
Listeners may experience amazing virtual surround
effects with their own multimedia players.
• Multichannel sound
The multichannel sound makes a 5.1 ch feel 10.1ch
sound therefore this mode provides a emotion which
you are involved with sound and you can feel a
detailed sound.
DIMMER
This function dims the LED (Light-emitting diode) of
front panel by half in power-on status.
Press DIMMER once. The LED (Light-emitting diode) of
front panel is turned off and the display window will be
darken by half. To cancel, press the button again.
NORMAL y XDSS ON
NORMAL → XDSS ON → MP3 - OPT ON
Source Display Effect
2.1 ch. VIRTUAL 3D STEREO
5.1 ch VIRTUAL Multichannel sound