C&T Solution VIO/MX200 Series User Manual page 42

Appendix – Panel Mount
Mounting Guide
Flush Mount / Panel Mount:
•
Cut hole in the wall w/ dimensions according to the screen size you have purchased.
Please refer to the next page for the list of cutout dimensions and max wall depths
•
From the FRONT of the wall, place the VIO Panel PC with its rear (display screen
forward) into the measured cutout hole.
•
Install the mounting clips around
the VIO and screw them in to secure
against the wall. If the wall's
thickness is greater than maximum
wall thickness allowed, the clips will
not fit. Please refer to the next page
for the list of max wall depths
REAR
VIO-200/MX200
mm
mm
Max. wall
Thickness for size
of VIO Series
FRONT
l User's Manual
42