System I/O; Rear; Top - C&T Solution VIO/MX200 Series User Manual

Chapter 1: Product Introductions

1.2 System I/O

1.2.1 Rear

DC IN
Used to plug a DC power input
with terminal block.
HDMI
Used to connect a DisplayPort monitor
VGA
Use the rear panel standard 15-pin female VGA
connector to connect the monitor to the system
graphics interface.
DisplayPort
The DisplayPort connector connects to a display
device with DisplayPort interface.

1.2.2 Top

VESA Mounting Hole
These are mounting holes for VESA
mount (75x75mm and 100x100mm)
COM Port for Touch Panel Connector (Resistive
Touch Only)
Use the rear panel female DB-9 touch panel
connector to connect the monitor to the system
interface.
USB for Touch Panel Connector
Use the rear panel standard USB touch panel
connector to connect the monitor to the system
interface.
Audio-in
This port connects PC audio source by the bundled
audio cable.
l User's Manual
VIO-200/MX200
19