Cleaning And Maintenance - Neilsen CT3192 Original Instructions Manual

Press the paper firmly on the sanding base plate.
The sanding paper must be fitted firmly on the sanding base plate and
should not come loose.
Grinding
Turn on machine.
Move grinding surface over the material to be ground/sanded with slight
elliptical movements.
Conduct a number of grinding/sanding steps with increasingly finer rains.
Care
From time to time, clean the dust exhaust opening with a dry brush.
Clean the housing only with a damp cloth - do not use any solvents!
Dry thoroughly afterwards.

7. CLEANING AND MAINTENANCE

Attention ! Before performing any work on the equipment, pull
the power plug.
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the
engine.Regularly clean the machine housing with a soft cloth, preferably after
each Keep the ventilation slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, In the back of this manual you
find an expanded view of the parts that can be ordered.
8